Huawei MA5608T equipped with 2xMCUD (4xGE Uplink, include 2 GE SFP Module) 1xMPWC DC Power Module
Comes with 2 PCS power cable, 1 PCS earth cable, 2 PCS mount ear, accessory package
MA5608T chassis
2 MCUD equipped, switching capacity 256Gbit/s active/standby mode
1 MPWC equipped, connect Power Board -48 V DC
MA5608T Dual GE AC bundle configuration, is recommended board bundle provided by hongking communication, it has most common service type and ordinary. welcome to contact us for customized configuration you need.
Huawei MA5608T GPON OLT H801MABR subrack
Comes with 2 PCS power cable, 1 PCS earth cable, 2 PCS mount ear, accessory package
Huawei MA5608T compatible 2U height GPON OLT system
Chassis supports 2 Service Slots
One power slot, can supply with 2 ports DC redundancy, or AC and DC redundancy (battery)
Two slot redundancy for main control board
Support GPON, EPON and P2P (Optical Access);xDSL and POTS(Copper Access)
Support GPON & EPON simultaneously
Support 8-GPON port interface card GPBD, 16-GPON port interface card GPFD
Support GPON split ration 1:128
Support GE uplink (embedded in MCUD main control board) or 10GE uplink (embedded in MCUD1 main control board)
MA5608T Software Version available at V800R012 or V800R013
Huawei MA5608T is a aggregation Optical Line Terminal (OLT), it supports up to 2 service slots and can support maximum 4096 subscribers (GPON). MA5608T has MCUD/MCUD1 Main Control Board available for selection, and one power slot redundancy for AC or DC power input.Total of 8 bundle line. Besides that, Thunder-link.com also offers more bundle line, to meet your different requirement on various scenario. In addition, Thunder-link.com provides self configuration page, where you can configure your own MA5683T by selecting boards and items yourself. With our professional technical support to rich your experience.
Huawei MA5608T equipped with 2xMCUD1 (2xGE SFP+2xGE/10GE SFP+ Uplink, include 2 GE SFP Module) 1xMPWD AC Power Module, 2xGPFD C+
Comes with 2 PCS power cable, 1 PCS earth cable, 2 PCS mount ear, accessory package
MA5608T chassis
2 MCUD1 equipped, switching capacity 256Gbit/s active/standby mode
1 MPWD equipped, input AC voltage: -100 V to -240 V
2 GPFD equipped, with 16 C+ SFP Module
MA5608T Dual 10GE AC 32GPON C+ bundle configuration, is recommended board bundle provided by hongking communication, it has most common service type and ordinary. welcome to contact us for customized configuration you need.Huawei SmartAX MA5608T GPON OLT, 19 inch, with 2U height 2 service slots, support EPON, GPON, 10G PON, P2P, xDSL and POTS; H801MABR subrack
| Product Name | OLT Service Subrack |
| Brand | Huawei |
| Mode | MA5608T |
| Packing Size | 59x38.5x18 |
| Gross Weight | 12 |
| Service Board Slots | 2 |
| Interface Board | MCUD+GPFD |
Pls Confirm with our saler the specification you need| MA5608T OLT 1xMCUD + 1xMPWC |
| MA5608T OLT 1xMCUD + 1xMPWD |
| MA5608T OLT 1xMCUD1 + 1xMPWC |
| MA5608T OLT 1xMCUD1 + 1xMPWD |
| MA5608T OLT 2xMCUD + 1xMPWC |
| MA5608T OLT 2xMCUD,1xMPWD |
| MA5608T OLT 2xMCUD1 + 1xMPWC |
| MA5608T OLT 2xMCUD1 + 1xMPWD |
The MA5608T, if serving as a mini OLT, supports GPON, 10G GPON, and P2P access modes. It can be installed at a residential district or a street side, which reduces the usage of ODN backbone optical cables, lowers the ODN deployment cost and difficulty, and minimizes the CO equipment room space.
The MA5608T, if serving as a mini-DSLAM, supports ADSL2+, VDSL2, SHDSL, and POTS access modes and provides Internet access, voice, and video services.
Figure 4 shows the appearance of the MA5608T.
Figure 4 Appearance of the MA5608T configured with the xPON boards | Item | MA5608T |
| Board configuration | 2 slots for control boards |
| 2 slots for service boards |
| 1 slots for the power interface board. |
| Switching capacity of the backplane bus | 720 Gbit/s |
| Supported control board and its switching capacity | MCUD/MCUD1: 128 Gbit/s in active/standby mode or 256 Gbit/s in load-sharing mode |
| System Layer 2 packet forwarding rate | MCUD/MCUD1: 128 Gbit/s in active/standby mode or 256 Gbit/s in load-sharing mode |
| Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
| BER in full load | BER of a port when the port transmits data in full load < 10 e-7 |
| System reliability specifications | System: redundant configuration. |
| System availability for the typical configuration: > 99.999% |
| Mean time between failures (MTBF): about 45 years. |
| NOTE: |
| Due to different network environments and different boards used by devices, the above-mentioned MTBF (45 years) of the MA5608T is only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference. For details, contact the related Huawei engineers. |
| Maximum number of ADSL2+ ports in a subrack | 128 |
| Maximum number of VDSL2 ports in a subrack | 128 |
| Maximum number of EFM SHDSL ports in a subrack | 64 |
| Maximum number of TDM SHDSL ports in a subrack | 32 |
| Maximum number of POTS ports in a subrack | 128 |
| Maximum number of ISDN BRA ports in a subrack | 64 |
| Maximum number of ISDN PRA ports in a subrack | 64 |
| Maximum number of GPON ports in a subrack | 32 |
| Maximum number of 10G GPON ports in a subrack | 8 |
| Maximum number of P2P FE ports in a subrack | 96 |
| Maximum number of P2P GE ports in a subrack | 96 |
| Operating environment | Operating temperature: -40°C to +65°C |
| Operating humidity: 5% RH to 95% RH |
| Atmospheric pressure: 61 kPa to106 kPa |
| Altitude: ≤ 4000 m |
Por favor verifique seu email!